Akumulatora lādētāji un starteri

Description

For heavy vehicles

The D250TS is a fast, fully automatic, 4-step DC/DC battery charger and battery separator for vehicles with dual 24V battery banks. D250TS is ideal for busses and trucks, recreational vehicles and boats. It supplies 10A to 24V batteries of 28-200Ah with a 12V output for equalising the starter battery and supply of 12V equipment connected to the starter battery. D250TS is IP65 classified for outdoor use, suitable for all types of lead acid batteries, including Wet, MF, EFB, Ca/Ca, AGM and Gel. Fitting the D250TS will give you the confidence that your batteries are always at the optimum charging voltage.

Features

• Quick installation time at a lower cost
• Takes charge automatically from any power source connected to it
• Automatic battery equalisation of 24 V systems
• Input voltage, 14-30V DC
• Output: 28.8V/10A, 14.4/10A

Technical data

Battery capacity: 28–200 Ah

Charging category: DC charging

Back current drain*: Corresponding to less than 1 Ah/month

Back Current Drain, details: *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.

Battery voltage; 24 V

Battery chemistry: Lead acid

Ambient operating temperature: -20 ˚C to +50 ˚C

Input: 14–30 V

Output: 28.8 V, 10 A

Ripple**: Less than 4 %

Ripple, details: **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.

Battery types: 24 V:; WET; MF; Ca/Ca; AGM; GEL

Degree of protection: IP65

Warranty; 2 years