Adhesives and sealants

With this 31-piece Carpoint tyre repair set, you will have all you need to repair tubeless tyres of car,motorbike, trailer or van quickly and easily. This repair set is good for 25 repairs. The set is suitable for repairing a hole in the tyre up to 6mm, caused, for example, by a nail, screw or other sharp object. Set contents: * 1 Reamer tool bit with plastic T-handle * 1 Plugger tool with plastic T-handle * 2 Tubes of rubber glue 6ml * 1 Folding knife to cut the wad with * 1 Tyre pressure gauge 5-50lb/ps * 25x Rubber plugs Instructions for use: Remove the sharp object from the tyre such as nail or screw. Roughen the hole with the reamer tool. You do this by moving the tool up and down in the hole. Push the plug through the eye of the plugger tool and coat the plug with the provided glue. Insert the plug into the hole with the plugger. Push it into the hole up to about two-thirds. Make sure the plug has gone through the tyre to avoid pushing it out when you inflate the tyre. Pull the plugger tool out with a quick move. Cut off the excess of the prop with the knife leaving about 5 mm. Inflate the tyre again and measure the pressure with the tyre pressure gauge. This repair kit is essential in every workshop and everything is packed in a handy lockable plastic case.